Ready: DVD commuter for Windows 10/11 is not detected

Milan has been enthusiastic virtually PCs always since his childhood days, and this led him to take interest in all PC-related technologies. Earlier joining WindowsReport, he worked as a front-end spider web developer. Read more

Updated:

Posted: January 2021

  • Are you using a DVD driver for Windows 10?
  • If so, you don't need us to remind yous how frustrating information technology can be to have a drive that'due south not working, non reading discs, non showing in the Device Managing director, and and so on.
  • Fortunately, with a couple of peachy tweaks, you lot can be sure to go that DVD driver working over again in no time.
  • It may have to work at the Registry level or even deeper, into the BIOS, and so try all our tips when your DVD bulldoze is not detected in Windows 10.

DVD driver for Windows not detected

TenINSTALL By CLICKING THE DOWNLOAD FILE

Just like any other operating system, Windows x has its share of problems. One particular issue that users reported was the DVD bulldoze not detected in Windows 10.

This can exist a large problem especially if you use optical media often, then let'southward see how to set it.

How to install DVD bulldoze in Windows 10?

DVD drives are usually just plug and play so they just need to exist connected and they'll be fix to use. Many have reported that DVD isn't working in Windows 10, but that'southward most likely due to hardware issues.

This isn't the only upshot, and few users reported that CD-ROM isn't working in Windows as well, just is commonly caused by a bad connection.

If PC won't recognize DVD disc, it'due south possible that the disc is damaged, or there might exist an event with your reader, so y'all might accept to supercede it.

What tin I do if the DVD driver for Windows x is not detected?

  1. Delete the IDE ATA/ATAPI controllers from Device Managing director
  2. Create new registry keys
  3. Check if your DVD bulldoze is properly connected
  4. Set your DVD bulldoze equally the commencement boot device in BIOS
  5. Remove Virtual Drive Software
  6. Utilise the Hardware Troubleshooter
  7. Load BIOS Defaults
  8. Run the SFC scan
  9. Use DISM

one. Delete the IDE ATA/ATAPI controllers from Device Manager

  1. Press Windows Key + X to open Power User Menu.
  2. Select Device Director from the list.
    dvd-drive-device-manager
  3. Once the Device Director opens, go to View and choose Show hidden devices.
    dvd-drive-hidden-drives
  4. Locate ATA Channel controllers and uninstall them all by right-clicking them and choosing Uninstall from the menu.
    dvd-drive-ata-channel
  5. Optional: Users also suggest removing Intel (R) Serial ATA Storage Controller, so if you have it make sure that you lot remove it as well.
  6. After you're done close Device Manager and restart your PC.

Users reported that this problem tin exist easily fixed by uninstalling IDE ATA/ATAPI controllers from Device Manager.

If you don't have ATA Channel bachelor in the Device Manager, be sure to delete SATA controller and restart your reckoner. When your computer restarts the DVD drive should appear once more.

Some users are too suggesting to remove your DVD drive from Device Managing director, so you might want to try that also.

In add-on to deleting devices from Device Manager, some users are too recommending that yous download and install the latest drivers for your DVD drive.

To exercise that merely visit your DVD bulldoze manufacturer's website and download the latest drivers for your device.

  • Struggling wit h outdated drivers? Be a step ahead using this guide.

one.1 Update drivers automatically

If you don't desire the hassle of updating drivers manually, we strongly suggest to exercise it automatically past using DriverFix.

After several tests, our team concluded that this is the best-automatized solution. Beneath y'all tin find a quick guide on how to practise it:

  1. Download and installDriverFix.
  2. In one case installed, the plan volition start scanning your PC for outdated drivers automatically.
  3. All you need to do is expect for the scan to consummate.
  4. Review the list and see if you want to update each driver individually or all at once.

⇒ Get DriverFix

2. Create new registry keys

  1. Press Windows Fundamental + R and enter regedit.
  2. Printing Enter or click OK to start Registry Editor.
    dvd-drive-regedit
  3. Once Registry Editor opens, get to the following key in the left panel: HKEY_LOCAL_MACHINE/SYSTEM/CurrentControl/SetServicesatapi
  4. Right-click atapi and select New > Key.
  5. Enter Controller0 as the name of the new key.
    dvd-drive-new-key
  6. Select Controller0 and in the correct pane right-click the empty space and select New > DWORD (32-flake) Value.
    • Enter EnumDevice1 as the name of new DWORD.
      dvd-drive-dword
  7. Double click EnumDevice1 DWORD to open its properties.
    • Enter one in Value data input field and click OK to save changes.
      dvd-drive-enum-properties

Users reported that you can fix this issue by modifying your registry, and earlier we start we have to warn you that modifying the registry can sometimes cause instability problems, therefore use actress circumspection.

In addition, it might be a good idea that y'all create a fill-in of your registry in case anything goes wrong.

Some users reported that y'all might have to create another controller key if you have more than than i DVD drive on your system.

To do that, repeat the aforementioned steps from to a higher place, but instead of calling the new central Controller0, be sure to name it Controller1.

If you don't want to use Registry Editor, yous can do the same thing by using Command Prompt. To do that follow these steps:

  1. Press Windows Key + Ten and select Control Prompt (Admin) from the menu.
    dvd-drive-admin
  2. In one case the Command Prompt opens enter the post-obit line and press Enter to run it: reg.exe add "HKLMSystemCurrentControlSetServicesatapiController0" /f /v EnumDevice1 /t REG_DWORD /d 0x00000001
    dvd-drive-cmd-reg
  3. Shut Command Prompt and restart your computer.

Past using Control Prompt you'll perform the same action as adding the registry key manually, therefore it's a decent and somewhat quicker alternative.

3. Cheque if your DVD drive is properly continued

SSD reset port error

Few users reported that this issue was acquired past the improperly connected DVD drive.

Expert Tip: Some PC problems are hard to tackle, particularly when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken. We recommend installing Restoro, a tool that volition scan your machine and identify what the error is.
Click here to download and starting time repairing.

Co-ordinate to them, the DVD drive was connected to the SATA 1 port on their motherboard while hard drives were continued to different ports.

Some motherboards require that you connect your media drives, such equally your DVD drive to a SATA four or SATA 5 port in order for them to work properly.

After reconnecting the DVD bulldoze to the appropriate port the issue was stock-still.

If you're having this problem on your PC, we strongly advise that you cheque your motherboard manual and see if your DVD drive is properly continued.

4.  Prepare your DVD drive as the beginning boot device in BIOS

Co-ordinate to users, you tin can ready the problem with the missing DVD drive in Windows ten past setting the DVD drive as the first boot device in BIOS.

To practise that you need to enter BIOS by pressing Del or F2 key during the boot sequence and navigate to the Boot department and set the DVD drive as the offset kicking device.

For detailed instructions on how to enter BIOS and how to set the DVD drive as the start boot device be sure to check your motherboard manual for detailed instructions.

5. Remove Virtual Drive Software

If yous have Virtual Drive software installed on your computer, there's a chance information technology interferes with your concrete DVD drive. Therefore, the actual DVD drive won't show in the File Explorer.

And then, if none of the solutions listed above managed to resolve the problem, go and uninstall the Virtual Bulldoze, and see if in that location are any positive changes.

If things are the same, turn to some other troubleshooting method. You may as well install your Virtual Drive again.

6. Use the Hardware Troubleshooter

  1. Open Settings.
  2. Caput over to Updates & Security > Troubleshooting.
  3. Now, click Hardware & devices, and go to Run the troubleshooter.DVD drive not showing in Device Manager Windows 7
  4. Follow further on-screen instructions, and permit the troubleshooter finish the process.
  5. Restart your estimator.

If you're using Windows 10 Leap Creators Update (2017) or later, you accept a new troubleshooting tool.

This tool is designed to deal with various arrangement and hardware problems. Therefore, information technology may be helpful in this instance, as well.

If you're having trouble opening the Setting app, take a await at this article to solve the issue.

If the Troubleshooter stops before completing the procedure, fix information technology with the help of this complete guide.

7. Load BIOS defaults

  1. Enter the BIOS settings of your estimator (if yous're not sure how, google your laptop or PC model).
  2. Navigate to the Exit tab and select Optimal Defaults cd problems windows 10
  3. Press Enter
  4. Now press F10 to save the changes and start your figurer again

It's also possible that your BIOS simply doesn't recognize the DVD drive. Then, the right solution, in this case, would be to only load the BIOS defaults.

8. Run the SFC scan

  1. Open Command Prompt as Ambassador.
  2. Type in the following command, and press Enter:sfc/scannowWindows 10 DVD drive not reading discs  DVD/CD-ROM drive not in device manager Windows 10 
  3. Look for the procedure to end (it can be a lengthy i).
  4. Restart your computer

If none of the solutions listed above managed to resolve the problem, we're going to effort with a fix of congenital-in troubleshooting tools.

The first thing we're going to try is the SFC browse. The SFC scan is an under the hood troubleshooting tool that tin can resolve various organisation problems.

9. Use DISM

  1. Open theControl Promptas an administrator.
  2. In the control line, copy-paste these lines one past ane and press Enter later each: DISM/online/Cleanup-Image/ScanHealth DVD drive not showing in Windows 8 
    • DISM/Online/Cleanup-Paradigm/RestoreHealth
  3. Wait until the procedure ends (it might take upwards to ten minutes).
  4. Restart your PC.

Similarly to the SFC browse, the DISM (Deployment Image Servicing and Management) is besides a troubleshooting tool, merely a more than powerful ane.

Then, if the SFC scan didn't get the job done, maybe we'll take more than luck with the DISM.

  • DISM fails on Windows? Check out this quick guide and get rid of the worries.

Missing DVD drives in Windows x can be a big problem, merely you tin can easily fix it by using one of our solutions.

If you have whatsoever other suggestions or questions, don't hesitate to leave them in the comments department beneath and we'll be sure to take a expect.

Often Asked Questions

  • Mod DVD drives can write on all types of DVDs too as all types of CDs.

  • In short, no. With DVDs losing popularity, most laptop manufacturers prefer not to include optical drives. The newest trend is to slowly drift to USB-C ports.

  • Yes, DVD drives can be bought as separate pieces of hardware as long as they accept the necessary slots included. If y'all have compatibility issues, check out this in-depth guide for more info.